This is an extension for the standard Illustro skin.
It is intended for everyone who uses water cooling on their PC.
This allows you to display various motherboard water cooling and external flow sensors with the help of HWiNFO64.
This skin is using the HWiNFO64 Shared Memory Support Funktion.
There are only two mainboards that I know of that have one, for example 1 x 3-pin Water Flow header.
One AM4 and one AM5 motherboard.
On this special header you can connect your external Water Flow header.
I had the AM4 and now i have the AM5 motherboard.
Another thing you would need is 1 x 2-pin Water Temp In header and 1 x 2-pin Water Temp Out header and 1 x 4-pin W_Pump+ header and 1 x 4-pin AIO Pump header on your motherboard.
And you need a external Water Flow Sensor that is supported by HWiNFO64.
I'm using the Aquacomputer highflow NEXT Water Flow sensor with two Phobya Water Temperature Sensor In-line 2 x G1/4 inner thread plugged into the motherboard headers.
And I created a WATER AGE skin that shows the age of your coolant.
To do this, you have to add two pieces of information in the SET FILL DATE skin.
Information 1: Filling date of the cooling water in the order of Day,Month,Year.
Information 2: Your personal maximum water age value in days of the coolant.
Range here is from 1 to 730 days.
A good value would be 730 days, i.e. 2 years. Then you should change the fluid.
Use Mouse Wheel Up and Down to change the values.
It is intended for everyone who uses water cooling on their PC.
This allows you to display various motherboard water cooling and external flow sensors with the help of HWiNFO64.
This skin is using the HWiNFO64 Shared Memory Support Funktion.
There are only two mainboards that I know of that have one, for example 1 x 3-pin Water Flow header.
One AM4 and one AM5 motherboard.
On this special header you can connect your external Water Flow header.
I had the AM4 and now i have the AM5 motherboard.
Another thing you would need is 1 x 2-pin Water Temp In header and 1 x 2-pin Water Temp Out header and 1 x 4-pin W_Pump+ header and 1 x 4-pin AIO Pump header on your motherboard.
And you need a external Water Flow Sensor that is supported by HWiNFO64.
I'm using the Aquacomputer highflow NEXT Water Flow sensor with two Phobya Water Temperature Sensor In-line 2 x G1/4 inner thread plugged into the motherboard headers.
And I created a WATER AGE skin that shows the age of your coolant.
To do this, you have to add two pieces of information in the SET FILL DATE skin.
Information 1: Filling date of the cooling water in the order of Day,Month,Year.
Information 2: Your personal maximum water age value in days of the coolant.
Range here is from 1 to 730 days.
A good value would be 730 days, i.e. 2 years. Then you should change the fluid.
Use Mouse Wheel Up and Down to change the values.
Statistics: Posted by SilverAmd — Yesterday, 5:44 pm — Replies 1 — Views 34